User Tools

Site Tools


ACR-CONFIG; ACR-CONFIG-5kV - ACRIOS programming cable


  • USB to TTL serial configuration cable is being used when configuring our products through ACRIOS Systems GUI.
  • Designed on FTDI chipset so no drivers are needed.
  • The configuration cable comes in 2 designs – optically isolated up to 5kV and non-isolated.
  • We strongly suggest using the optically isolated variant to protect your PC. We have tested it for you so you don't need to.
  • Compatible with TTL-232R-3V3-AJ

Technical specification

Product variants
Optically isolated: No Optically isolated: Yes
Blocking voltage: 0 Blocking voltage: 5kV
Conversion type: USB to 3.3V TTL converter
Baud rate: 3Mbaud (115 200 for ACR-CV converters)
Converter connector type: 3.5mm jack
Chip type: FT232
PC connector USB A
Cable length: 1.5m
Weight: 80g
Operating temperatures: -40°C..+85°C
Ordering code
ACR-CONFIG Programming cable without the optical issolation
ACR-CONFIG-5kV Programming cable with the optical issolation of 5kV

For orders please contact Mr. Smetana at smetana(at)

public/products/acr-config.txt · Last modified: 2020/10/12 13:15 by Acrios Admin